Connecting A Power Source; Using The Rechargeable Batteries - Sony D-E01 Operating Instructions Manual

Connecting a power source

You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see "Playing a CD")
• LR6 (size AA) alkaline batteries (battery
case)
For the battery life and charging time of the
rechargeable batteries, see "Specifications."
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
• NH-14WM (supplied)
1
Slide OPEN in the direction of the
arrow to open the battery
compartment lid.
2
Insert two rechargeable batteries
by matching the 3 and # to the
diagram on the lid and close the
lid.
3
Slide OPEN in the opposite
direction of the arrow to lock the
lid.
18
4
Connect the AC power adaptor to
the EXT BATT/DC IN 4.5 V jack of
your CD player and an AC outlet,
then press x•CHG to start
charging.
If the AC power adaptor does not fit the
AC outlet, use the AC plug adaptor.
CHG/HOLD lamp
x•CHG
button
AC power adaptor
The CD player charges the batteries. The
indicator sections of
of the remote control light up in
succession and the CHG/HOLD lamp
lights up.
When the batteries are completely
charged, all indications in the display
disappear and the CHG/HOLD lamp
goes off.
If you press x•CHG after the charge has
already been completed, the
indicator and "FULL" appear in the
display and the CHG/HOLD lamp
flashes.
5
Disconnect the AC power adaptor.
x•CHG button
to EXT BATT/
DC IN 4.5 V
to an AC outlet
in the display