Connecting To A Power Source; Using The Rechargeable Batteries - Sony D-EJ775 Operating Instructions Manual

B Connecting to a power source
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see "Playing a CD")
• LR6 (size AA) alkaline batteries
For the battery life and charging time of the
rechargeable batteries, see "Specifications."
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
• NC-WMAA
• NH-WM2AA (NH-WMAA × 2)
1
Open the battery compartment lid
inside your CD player.
2
Insert two rechargeable batteries
by matching the 3 to the diagram
in the battery compartment and
close the lid until it clicks into
place.
Insert the # end first (for both batteries)
3
Connect the AC power adaptor to
the DC IN 4.5 V jack of your CD
player and an AC outlet, then
press CHARGE/x to start
charging.
CHARGE/x button
to DC IN 4.5 V
AC power adaptor
to an AC outlet
The CD player charges the batteries. In
the display on the remote control, the
indicator sections of
succession. The CHARGE lamp on the
player turns on. When the batteries are
completely charged, the CHARGE lamp
and indicator get turned off.
If you press CHARGE/x after the
charge has already been completed, the
indicator flashes and "Full"
appears in the display.
4
Disconnect the AC power adaptor.
light up in
(Continued)
13