About platform interfaces
Every platform includes multiple interfaces. The exact number of interfaces that are on the system
depends on the platform type.
Each interface on the platform has a set of properties that you can configure, such as enabling or
disabling the interface, setting the requested media type and duplex mode, and configuring flow control.
For information about optical transceivers and cable pinouts for this platform, see F5 Platforms:
Accessories at
plat-accessories.html
About 1GbE SFP/10GbE SFP+ interfaces
The i800/i2000/i4000 Series platforms include 1GbE SFP ports (1.0-4.0 and 7.0-10.0) and 10GbE SFP
ports (5.0-6.0, 11.0-12.0), in which you can use 10 GbE (SFP+) or 1GbE (SFP) transceiver modules.
Important: The SFP+ ports on these platforms are not backwards compatible with SFP transceiver
modules.
About managing interfaces
You can use the TMOS Shell (
View the status of a specific interface using tmsh
You can use
1. Open the TMOS Shell (
tmsh
2. Change to the network module.
net
The system prompt updates with the module name:
(tmos.net)# user@bigiq01(Active)(/Common)(tmos.net)#
3. Display the current status of a specific interface.
show interface <interface_key>
This is an example of the output that you might see when you run this command on a specific
interface:
--------------------------------------------------------------
Net::Interface
Name
Status
Bits
In
--------------------------------------------------------------
5.0
up
1.1T
49.7K
View the status of all interfaces using tmsh
You can use
1. Open the TMOS Shell (
tmsh
2. Change to the network module.
support.f5.com/kb/en-us/products/big-ip_ltm/manuals/product/f5-
.
) or the Configuration utility to manage platform interfaces.
tmsh
to view the status of a specific interface on a platform.
tmsh
).
tmsh
Bits
Pkts
Pkts
Drops
Out
In
Out
2.5G
95
to view the status of all interfaces on the platform.
tmsh
).
tmsh
Platform Guide: i2000/i4000 Series
user@bigip01(Active)(/Common)
Errs
Media
0
0
10000SR-FD
17