Installation - Lang Electric Clamshell CSE12-208VCD Installation, Operation And Maintenance Instructions

THIS APPLIANCE MUST BE GROUNDED AT THE
TERMINAL PROVIDED. FAILURE TO GROUND THE
DANGER
APPLIANCE COULD RESULT IN ELECTROCUTION
AND DEATH.
INSTALLATION OF THE UNIT MUST BE DONE BY
PERSONNEL QUALIFIED TO WORK WITH
ELECTRICITY AND PLUMBING. IMPROPER
WARNING
INSTALLATION CAN CAUSE INJURY TO PERSONNEL
AND/OR DAMAGE TO EQUIPMENT. UNIT MUST BE
INSTALLED IN ACCORDANCE WITH ALL
APPLICABLE CODES.
BROILER ELEMENTS CAN IGNITE GREASE FIRES ON
THE GRIDDLE SURFACE, WHICH MAY RESULT IN
PROPERTY DAMAGE, SERIOUS INJURY OR DEATH.
WARNING
ENSURE GRIDDLE SURFACE IS SLOPPED DOWN
FROM BACK TO FRONT BY AT LEAST ¼" BEFORE
COOKING
The data plate is located behind the Clamshell®
between the two pivot arms. The Clamshell voltages,
wattage, serial number, wire size and clearance
NOTICE
specifications are on the data plate. Carefully read
and understand this information before proceeding
with the installation.
The installation of any components such as a vent
hood, grease extractors or fire extinguisher systems
NOTICE
must conform to the applicable National, State and
locally recognized installation standards.
Electrical Connection
Verify griddle installation was performed as directed in the installation instructions.
Connect electrical service to the box at the back of the griddle.
Electrical specifications are located on the data plate.
Clearance
Use this griddle only in non-combustible locations.
Maintain clearances of base appliance.
ETL File 68964 7

Installation

Installation
Rev.A2007