Rating Plate Of A Motor - ABB MS116 Manual

3.2.4 Rating plate of a motor

The rating plate details on a motor provide the user with information relating to the construction and performance
characteristics of the motor. On the rating plate it is necessary to indicate the IE code and nominal efficiency of the
motor at full load 100 %, 3/4 load 75 % and 1/2 load 50 %, as required by IEC 60034-30-1.
Here is an example of a rating plate:


 

  




Figure 18: Rating plate of a ABB motor
APR I L 19
MA N UA L MOTOR START ER G UI D E


  



Basic information:

- Certification label
 - Efficiency Code – IE

- Number of phases
 - ABB motor type
 - Manufacturing date

- Insulation class
 - Degree of protection

- Product code

- Motor weight
 - IEC Standard
In-/output information:

- Rated operating voltage

- Frequency
 - Motor rated power

- Full load speed

- Rated operating current

- Power factor
- Service factor

 - Partial load efficiencies

- Rotation speed
 - Drive end bearing type and amount of grease
(where applicable) and non-drive end bearing type and
amount of grease (where applicable)
37/ 80