Editing Cues - ChamSys QuickQ Series Installation, Software Manual And Warranty Certificate

www.chamsys.co.uk
Go to a Cue
Pull out the arrows on the end of the comments box and select Go to This Cue.

3.4 Editing Cues

Moving cues in a cue stack
Cues in a cue stack can be reordered and moved by selecting the 6 dots symbol by holding and then dragging the
cue to a new location in the list. The cues will be renumbered to reflect the move.
Insert a cue
To insert a new cue, press record and then select an existing cue. A new cue will be inserted prior to the cue
selected. The cue will be numbered and automatically.
Deleting Cues
To delete a cue, select the main menu button, select remove and then select a cue to delete.
Record Merge
To add selected and captured attributes to an existing cue:

Select some fixtures and make any required changes.

Press record.

Select (Show Options).

Select Merge

Select an existing cue to merge into.
Recoding a new cue from current levels on stage
This allows us to record all of the current levels and values being output from the console into a new cue. These
values can be from cues being played back from the cue faders, from one or more playbacks and selected and
captured fixtures. This is in effect a snapshot of everything the console is outputting.

Raise some faders and make some changes to output your desired look on stage.

Select Record.

Select Show options, if necessary.

Select Record All.

Select any of the cue recording methods to add or insert a cue or replace a cue.
Page 32 of 43
QuickQ User Manual