Home Screen And Controlling Fixtures - ChamSys QuickQ Series Installation, Software Manual And Warranty Certificate

www.chamsys.co.uk QuickQ User Manual

3.0 Home Screen and Controlling Fixtures

3.1 Home –
Layout Screen
Introduction to the Layout Screen
On QuickQ consoles, the Layout screen can be accessed by pressing the home button located centrally at the top
of the display. Using this screen, fixtures can be arranged as desired and selected. Colours and intensities of these
fixtures will also be visually displayed here. Once patched, fixtures will appear near the top of the window. Both
fixtures and groups can be viewed here by switching between these on the left.
Creating Groups
Groups can be created by selecting fixtures, either in the Layout window, or using the multi-functional faders on
the left of the console, pressing the Record icon, and selecting an empty fader in Group mode. The newly created
group should then appear under the Groups section in the Layout screen.
Setting up the Layout Screen
Fixtures or groups can be added to the Layout screen by simply dragging them to their desired positions. Once
fixtures have been placed as required, the Layout screen can be locked or unlocked by tapping the padlock icon
near the top right of the display. This prevents any unwanted movement of fixtures.
Zoom In/Out
The view of this window can be adjusted using a two-finger pinching action to zoom in and out. The view can also
be reset to default by tapping the magnifying glass icon near the top right of the display.
Page 18 of 43