6.2
Connecting Low Voltage Wiring—Optional
Low voltage connections to the XDP/XDC are required only for units with the optional condensation
detection feature. Viewing the XDO from the front or from above, the low voltage terminal block is on
the right side of the unit (see Figure 19 for knockout locations; see Figure 21 for low voltage termi-
nal block location).
For units equipped with the condensation detection package, make low voltage connections according
to site-specific drawings. Follow all local and national electric codes.
Figure 21 Low voltage wiring connections
Low-Voltage
Terminal Block
INSIDE FRONT PANEL VIEW
21
: http://splitoff.ru/tehn-doc.html
Electrical Connections
High-Voltage
Cover