3.5.3
Removing the XDO from the Pallet
1. Unfold the unit bag to expose the XDO.
2. Verify the nameplate information found on the XDO against the bill of lading information. If the
information does not match the product specified, contact your local sales representative.
3. At least two properly trained personnel may lift the XDO off of the pallet and onto a flat surface,
as shown in Figure 8.
4. To protect the painted surface of the XDO, lay a piece of protective material, the length of the
unit, on the flat surface before moving the XDO.
Figure 8
Removing XDO from shipping pallet
8
: http://splitoff.ru/tehn-doc.html
General product information