Elcometer 224 User Manual page 5

4 GETTING STARTED (continued)
4.2 SELECTING YOUR LANGUAGE
1 Press and hold the
displayed.
2 Select your language using the
3 Follow the on screen menus.
To access the language menu when in a foreign language:
1 Switch the gauge
2 Press and hold the left softkey and switch the gauge
3 Select your language using the
4.3 CONNECTING THE PROBE -
SEPARATE GAUGES ONLY
1 Rotate the probe plug to align the pins.
2 Screw in the collar - clockwise.
See Section 13 ' Elcometer 224 Separate Probes'
on page en-13 for details of the probes available.
4.4 SELECTING THE MEASUREMENT MODE
The Elcometer 224 has a choice of three measurement modes;
'Immediate', 'Custom' and 'Standards' - see the table below for an
explanation of the different modes available. The mode selected
depends on which International Standard the user is working in
accordance with.
To select the measurement mode:
1 Press Menu/Setup/Measurement Mode or when in batching
(Model T only), Batch/New Batch/Measurement Mode.
é
2 Use the
The measurement mode selected and in use, is
indicated by the icon shown on the right of the
display (a). If no icon is displayed, 'Immediate'
Mode is in use.
Icon Displayed
None
www.elcometer.com
ON OFF /
OFF .
softkeys to select the required measurement mode.
ê
Measurement Mode
Immediate: Allows the users to take single measurements
which are displayed on the gauge (Model B & T) and saved
into the batch memory (Model T only).
Note: This mode allows gauges to be used and measurements to be taken
in the same way as older Elcometer 224 models.
button until the Elcometer logo is
é ê
softkeys.
é ê
softkeys.
R
ON .
2
1
a
continued...
en-4