Sfp Modules Supported For The Switch 4210 - 3Com Switch 4210 Series Getting Started

SFP Modules
Supported for the
Switch 4210
Table 11 Technical specifications for the Switch 4210 PWR models
Model
Operating temperature
Relative humidity
(non-condensing)
n
The Switch 4210 26-port, 18-port, and 9-port PWR models provide an
over-temperature protection mechanism. When the internal temperature exceeds
°
65°C (149 F), they will stop providing power from all ports. When the temperature
is below 60°C (140
The Switch 4210's front panel provides one or two 1000 Mbps SFP ports in which
you can plug small form-factor (SFP) modules, which are described in Table 12.
Table 12 SFP modules supported by the Switch 4210s
Type
100 Mbps SFP module
1000 Mbps SFP module
100 Mbps bidirectional (BIDI) module
1000 Mbps BIDI module
SFP stack module
n
The types of SFP modules may vary over time. Consult 3Com marketing
■
personnel or technical support personnel to obtain the latest information about
SFP modules.
For the SFP module specifications, refer to 3Com Transceiver Data Sheet.
■

SFP Modules Supported for the Switch 4210

Switch 4210
26-port PWR
0°C to 45°C (30°F to 113°F)
10% to 90%
°
F), they will continue to provide power from all ports.
Model
3CSFP81
■
3CSFP82
■
3CSFP91
■
3CSFP92
■
3CSFP97
■
3CSFP9-81
■
3CSFP9-82
■
3CSFP85
■
3CSFP86
■
SFP-STACK-Kit
Switch 4210 Switch 4210
18-port PWR 9-port PWR
19