KVH Industries TracVision 6 Technical Manual page 45

This information has to be entered for each of the four
transponder categories:
• vertical high
• horizontal high
TracVision 6 requires that the data fields for all four transponder
categories be provided. If the selected satellite does not have
information for one or more of the transponder categories,
default information should be entered in the fields as follows:
Transponder Data
Frequency
Symbol Rate
FEC Code
Network ID
Polarity and Band
After entering this information, it is necessary to save these
settings. To do so, type:
@SAVE,A (or @SAVE,B
@DEBUGOFF
After completing this process,
power or typing ZAP
One of your user-defined satellite options has now been added to
the TracVision 6 satellite library. This option will now be
available the next time the SATINSTALL command is given.
An Example of Configuring a User-defined Satellite
The following is an example of configuring the fictional
YOURSAT 101 as the USER1 configured satellite. Prior to
configuring this satellite or any others, be certain to get the most
up-to-date information from one of the sources previously
discussed.
54-0166 Rev. B
• vertical low
• horizontal low
Default Value
00000
27500
the same value as provided for those
transponders with data
0x0000
whichever combinations are not
already provided
if this data is for Satellite 2)
restart the system by either cycling
in the maintenance screen.
Table 2-9
Satellite Transponder
Default Data
Installation
2-19