Blower-Fan Unit Operation; Turning On The Power Of The Blower-Fan Unit - Roland DU2-64 Supplementary Manual

Blower-fan Unit Operation

Turning On the Power of the Blower-fan Unit

The blower-fan unit does not have a power switch. The power of the blower-fan unit can be turned
on and off by switching the settings on the printer side.
To use the blower-fan unit, select "ENABLE" in the printer's [BLOWER FAN] menu. When this is set to
"ENABLE," the blower-fan unit will start turning simultaneously when printing starts. The blower-fan
unit automatically stops when printing ends.
Procedure
Press [MENU].
A
Press [ ] several times to display the screen shown below.
B
Press [ ].
MENU
HEATER MENU
Press [ ] several times to display the screen shown below.
C
Press [ ].
HEATER MENU
BLOWER FAN
Use [ ] [ ] to select "ENABLE."
D
Press [ENTER].
BLOWER FAN
DISABLE ENABLE
Press [MENU] to go back to the original screen.
E
Removing This Machine
Select "DISABLE" in the [BLOWER FAN] menu and switch off the power before removing this ma-
chine.
2. Basic Operations
19