Using Your System; Locking/Arming - Viper 211HV Owner's Manual

using your system

locking/arming

Pressing
kill (optional) and locking the doors (if connected). The horn will
honk (if connected and in audible mode, see "audible mode" on
AUX
AUX
page 10) and the parking lights will flash once to confirm arming
of the system. While the system is armed, the status LED will flash
once per second. The Failsafe
prevent the vehicle's starter from cranking.
note: Manually locking the vehicle does not arm the
system; it will only lock the doors.
The system can also be programmed to arm the optional Failsafe
Starter Kill automatically (called Passive Mode). If the system has
been pro grammed for Passive Mode, the Failsafe
automatically activate 30 seconds after the ignition has been turned
off. After the ignition has been turned off, the status LED will flash
rapidly to indicate that the system is in Passive Mode.
If Passive Mode has been programmed on, then it is also possible
to program the system for Passive Locking. With Passive Locking,
the vehicle doors lock automatically at the same time that the Failsafe
Starter Kill is activated. If Passive Locking is programmed on, care
must be taken to prevent the keys from being locked in the vehicle.
note: For Passive Mode to be effective, the Failsafe®
Starter Kill relay must be installed.
8
500-0092- 01 (R1 .0)
for one second arms the system by activating the starter
Starter Kill (if in stalled) will also
®
© 201 9 Di rected. Al l ri ghts reser v ed.
Starter Kill will
®
®
®