Displaying The Station Name; Other Functions; Labeling The Rotary Commander; Qh Enter Button - Sony CDX-4000X Operating Instructions (primary manual) Operating Instructions Manual

5
To return to the normal radio reception,
press (ENTER).
Tip
To erase or correct a name, enter "_" (under-bar)
for each character.

Displaying the station name

Press (DSPL) during radio reception.
Each time you press (DSPL), the item
changes as follows:
Station name* y Frequency
* If the station name of a station is not stored,
"NO NAME" appears in the display for one
second.
Erasing the station name
1
Tune in a station whose name you want
to erase.
2
Press (MENU), then press either side of
(PRST) repeatedly until "NAME DEL"
appears.
3
Press (ENTER).
4
Press (ENTER) for two seconds.
The name is erased.
Repeat steps 1 through 4 if you want to
erase other names.
5
Press (MENU) twice.
The unit returns to the normal radio
reception mode.
Note
When you erase all of the station names, "NO
NAME" appears in step 4.

Other Functions

You can also control the unit with a rotary
commander.
Labeling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
D S P L
M O D E
S O U N D
S O U N D
M O D E
D S P L
13