Using The Rotary Commander - Sony CDX-4000X Operating Instructions (primary manual) Operating Instructions Manual

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
(the SOURCE and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
Tuner t CD
Pressing (MODE) changes the operation
in the following ways:
Tuner: FM1 t FM2 t FM3 t AM1 t AM2
By rotating the control
(the SEEK/AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to find a specific station.
14
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorized on the
Other operations
(MODE)
Rotate the VOL control to
adjust the volume.
Tip
If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for two
seconds to turn off the clock indication after
turning off the engine.
number buttons.
Press (SOUND) to
adjust the volume and
sound menu.
Press (DSPL) to display
the memorized names.
Press (ATT) to
attenuate the
sound.
Press (OFF) to
turn off the unit.