Enabling The Hdr-Dad Solution - Agilent Technologies 1200 Infinity Series User Manual

Enabling the HDR-DAD solution

Parts required #
1
1
Only one of the DADs needs a license (DAD
N O T E
The steps below are valid for the DAD which shall get the license.
1 Turn off the module.
2 Plug-in the HDR-DAD USB dongle into the back of the detector
You must use the same HDR-DAD USB dongle for reinstallation as was originally used for
N O T E
installation. This, for example, is necessary after exchanging the mainboard of the
detector. Thus it's advisable to keep the serial number information of the detector together
with the HDR-DAD USB dongle.
HDR-DAD Solution
p/n
N/A
5188-8049
(G7117A/B or G4212A/B).
Installation of the HDR-DAD Solution
Description
HDR-DAD USB dongle
Contains licence to enable HDR-DAD solution
USB A F-USB Mini B M OTG (Module to Flash Drive)
For the installation of the HDR-DAD USB dongle into a G7117A/B
or DAD
1

Enabling the HDR-DAD solution

).
2
3
21