Radio Info; Hardware Test - Motorola ST7000 Product Information Manual

- MS Logging
• CE Monitor – Crypto-Engine Monitor.
• Key Info – Key Information allows the radio to display security information for the following
conditions:
- For the serving cell:
+ Curr Cell SC – Security class of the serving cell, that is Security Class 1, Security Class 2,
Security Class 3, Security Class 3 with Group Cipher Key (GCK).
- For the group OTAR:
+ CMG GSSI – Crypto-Management Group (CMG) group of MSs with common key material
- For SDMO and TM-SCK OTAR:
+ SCK SubsGrType – SDMO SCK Subset Grouping Type.
+ Curr Subs Info – current SDMO SCK Subset Number and SCK-VN.
+ Fallback TMSCK – current Fallback TMO SCK, that is SCKN and SCK-VN attributes.
+ SCK List – list all SCKs stored in the radio, that is SCKN and SCK-VN attributes (SCK
version number).
NOTICE: When checking for SDMO key information in the radio, the SDMO KAG
(SDMO Key Association Group) range in the AuC (Authentication Center) is from 0 to
9 and the range in the radio is from 1 to 10.
- For the GCK:
+ Full GCK-VN – current Full GCK-VN. (GCK version number).
+ GCK List – list all GCKs stored in the radio, that is GCKN and GCK-VN attributes.
3.14

Radio Info

Depending on the codeplug configuration the manufacturer, type, and serial number information is
available. The information is available through the service page accessible from the MMI.
The Radio Info provides the following data:
• Manufacturer
• Model Number
NOTICE: The manufacturer and model number information is displayed only on radios
distributed under Motorola Solutions trademark.
• Release Name – the version of radio software.
• Individual Short Subscriber Identity (ISSI) – the ISSI which is in use.
• TETRA Equipment Identity (TEI) – the TEI is displayed as a hexadecimal number.
• Serial number – Motorola Soutions serial number is displayed only on radios distributed under
Motorola Solutions trademark.
3.15

Hardware Test

This mode allows performing basic hardware tests and share the results immediately on the display.
NOTICE: The hardware test mode is only for use by authorized persons.
Send Feedback
MN002955A01-AA
Chapter 3: Man-Machine Interface
71