Locating A Specific Disc - Sony CDP-CX335 Operating Instructions Manual

Playing CDs

Locating a Specific Disc

≠ AMS ±
I / u
DISC
Number
buttons
>10
·
Locating a disc on the player
Turn the JOG dial until the desired disc number or
Disc Memo (see page 24) appears in the display. Push
the JOG dial to start play.
To skip discs quickly
Press +100. Each time you press +100, the player skips
100 discs.
GB
14
+100
JOG
+100
MEMO SEARCH
ENTER
MEMO SCAN
Locating a disc directly using the remote
1
Press DISC.
2
Press the number button of the disc.
Example: To enter number 35
Press 3 then 5.
To enter number 100
Press 1, then 10/0 twice.
3
Press ENTER to start play.
Locating a disc by scanning each Disc
Memo (Memo Scan) Z
You can locate a desired disc to play quickly by
scanning the Disc Memos (see page 24) in the display .
Note that you cannot use this function in the ALL
DISCS Shuffle Play mode.
1
Press MEMO SCAN.
"MEMO SCAN" appears in the display, and the
Disc Memos scroll in the display.
2
Press · when the Disc Memo of the desired disc
to play appears.
The disc is set to the playing position, and the
player starts playing.
In Program Play mode, the disc will be added to
the end of the program if you press ENTER instead
of ·.
Note
If "NO ENTRY" appears in the display, no disc has been
labeled with the Disc Memo. Try the Memo Scan function
again after labeling the discs.