Craftsman 917.20381 Operator's Manual page 22

3. ATTACH MOWER SIDE SUSPENSION
ARMS (A) T O CHASSIS -Position hole
inarm over p in(B) o noutside oftractor
chassis and secure with retainer spring.
4. Repeat onopposite side oftractor.
8, Insert endoflink(E)intohole infront
mower b racket (H)andsecure w ith
washer and retainer spring ( J).
5. ATTACH REAR LIFT LINKS (C)- Lift
rear c orner ofmower and position slot
inlink assembly over p in onrear m ower
bracket (D) a nd secure with washer and
retainer spring.
6, Repeat onopposite side oftractor.
9. Push clutch cable housing guide (P) into
bracket, slide collar (L) onto guide and
secure with retainer spring (K),
10. Hook end of clutch cable spring (Q) into
hole in idler arm (R).
11. Install belt onto engine clutch pulley (M).
7, ATTACH FRONT LINK (E) - Work from
left side of tractor, Insert rod end of link
assembly through front hole in tractor
front suspension bracket (F).
IMPORTANT: Check belt for proper routing
in all mower pulley grooves,
12. Raise attachment lift lever to highest
position.
13. If necessary, adjust gauge wheels before
operating mower as shown in the Opera-
tion section of this manual.
22
0_042