Charging Cable - Cobra IG20SI User Manual

6.1) DC Application
The DC receptacle, 15-30V under no load condition,
may be used for charging 12V battery only.
NOTE
In DC operation, turn the
ECON SW
"OFF" ( ) position.
6.1.1) Disconnect the vehicle battery ground cable
from the negative battery terminals.
6.1.2) Connect the DC receptacle to battery
terminals with the charging cable
CAUTION
Connect red lead to positive battery terminal and
black lead to negative battery terminal.
6.1.3) Turn ECON SW to "OFF" ( ) position and
then start engine
to the
NOTE
Do not start the automobile engine when the
generator is still connected to the battery, otherwise
the generator will be damaged.
Disconnecting the charging cable
1)Stop the engine.
2)Disconnect the black lead from the negative
battery terminal.
3)Disconnect the red lead from the positive battery
terminal.

CHARGING CABLE

<<17>>