Installation
Remove cover from the door hinge
and cover from the soft-close
mechanism.
Click the red safety aid (supplied
with the appliance) into place in the
opening.
The safety aid prevents the soft-close
mechanism and the hinge plate from
snapping shut.
Do not remove the red safety aid until
instructed to do so.
Push pin out of door hinge and
remove it.
Move the hinged arm of the soft-
close mechanism away from the door
hinge.
90
Undo and remove screws on soft-
close mechanism and insert a
screwdriver behind the soft-close
mechanism.
Remove soft-close mechanism .
– To fit the door opening angle limiter
Press a door opening angle limiter
in from above and below as shown.