Electrical connection
Do not connect the appliance to an
inverter such as those used with an
autonomous energy source e.g. solar
power. When switched on, peak loads
in the system can cause the safety
switch-off mechanism to be triggered.
This can damage the electronic unit.
The appliance must not be used with
so-called energy-saving devices
either. These reduce the amount of
energy supplied to the appliance,
causing it to overheat.
86
Connecting the appliance
Insert the plug connector into the
socket at the back of the appliance.
Make sure that the plug connector has
clicked into position correctly.
Insert the mains plug into the mains
socket and switch on.
The appliance is now connected to the
electricity supply:
will appear in the display.
Follow the steps described in
"Switching on and off - Switching on".