Selecting further settings
Setting options in sub-menu
Touch .
You will access a sub-menu. The
following setting options are then
available:
– WPS = WPS pushbutton
– = Wireless access point (soft
access point)
– = Reset Wi-Fi module
– = Wi-Fi module standard settings
– WPS Push Button
As an alternative to networking your
appliance via the Miele@mobile app we
recommend using WPS (Wireless
Protected Setup). To do so you will
need a WPS-compatible router.
Touch .
WPS appears
Press WPS.
For a certain time an attempt will be
made to create a Wi-Fi link.
Activate the "WPS" function on your
router within two minutes.
Once connection has been created, the
display shows .
Confirm with
OK
The display changes to the start screen,
and appears in the top right.
If a connection could not be created,
the display shows .
You have probably not activated WPS
at your router quickly enough. Repeat
the steps above.
42
.
– Wireless access point (soft access
point)
You can create a direct link from your
refrigeration appliance to your mobile
device (e.g. smartphone, tablet PC,
etc.). This connection is necessary in
order to create a network connection
with the Miele@mobile app.
Touch .
For a certain time an attempt will be
made to create a direct link.
Confirm the link creation at the
mobile device.
The display changes to the start screen,
and appears in the top right.
If no link is confirmed after approx. 15
minutes, the procedure is cancelled.
The display changes to the start screen.
– Reset Wi-Fi module
You can reset all entered settings and
values for Miele@home to standard
settings. All settings, which do not
affect Miele@home will remain
unchanged and the Wi-Fi module is
switched on.
Touch .
will appear.
Confirm with
OK
The Wi-Fi module is restarted. After a
successful restart, the display changes
to the start screen and appears in
the top right.
Wi-Fi module default settings
You can reset all entered settings and
values for Miele@home to standard
settings. All settings, which do not
.