Safety And Operating Decals - Generac Power Systems Magnum MLT3060M Owner's Manual

Safety and Operating Decals

See Figure 1-1 through
numerous safety and operating decals. These decals
provide important operating instructions and warn of
dangers and hazards. The following diagrams illustrate
decal locations and descriptions.
Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal part numbers
can be found in
www.generacmobileproducts.com.
ID
1 Warning–Stand Clear When Mast is Being Tilted
2 Warning–Hot Surface
3 Warning–Ultraviolet Radiation
4 Instruction–Raise Mast Manual Winch
5 Instruction–Raise Mast Electric Winch
6 Instruction–Mast Control Electric Winch
7 Danger–Do Not Remove
8 Danger–Electrocution
9 Instruction–Keep Tension on Cables
10 Mast Junction Box Wiring
11 Warning–Hot Surface, Fire and Explosion
12 Instruction–Towing Instructions
13 Instruction–Align Before Tilting Mast Down
Danger–Lower Mast Before Tilting, Do Not Position
14
Light Tower Under Power Lines
15 Forklift Pockets
16 Single Point Lift Location
17 Warning–Secure Mast Before Lifting or Towing
18 Instruction–Engine Operation
Danger–High Winds and Storms, Overhead
19
Obstructions
20 Danger–Do Not Move Unit With Tower Up
21 Warning–Read Manual Before Operating Unit
Warning–Verify Circuit Breaker is OFF Before
22
Starting Unit
23 Tie-Down Point
24 Secure Mast
25 Consult Manual
26 Warning–Pinch Point
Owner's Manual for MLT3060M-K Light Tower
Figure 1-4. This unit features
the parts manual
Description
27 Danger–Diesel Fuel, Asphyxiation, No Open Flame
28 Ultra Low Sulfur Fuel Only
29 Grounding Stud
30 Warning–Fire and Explosion
31 Warning–Moving Parts
32 Warning–Hot Surface, Moving Parts
at
Safety Rules & General Information
7