Advertisement
Billion BIPAC-7500G / 7500GL 802.11g ADSL VPN Firewall Router with 3DES Accelerator
Wireless
WLAN Service: Default setting is set to Enable.
Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factory default is 802.11b +
g.
(BIPAC-7500G ONLY) Nitro Mode: Default is enabled for increasing performance in
mixed 802.11b and 802.11g wireless networks.
ESSID: Enter the unique ID given to the Access Point (AP), which is already built-in to the
router's wireless interface. To connect to this device, your wireless clients must have the
same ESSID as the device.
ESSID Broadcast:
Disable: Any client that using the "any" setting cannot discover the Access Point (AP)
in question.
Enable: Any client that using the "any" setting can discover the Access Point (AP) in
question.
Regulation Domain: There are five Regulation Domains for you to choose from, including
North America (N.America), Europe, France, etc. The Channel ID will be different based
on this setting.
Channel ID: Select the ID channel that you would like to use.
Reset: Reset the Access Point (AP), which is already built-in to the router's wireless
interface.
Connected: true or false. That it is the connection status between the system and the
build-in wireless card.
Chapter 4: Configuration
30
Advertisement
