Configuration; Lan (Local Area Network); Ethernet - Billion BIPAC-7500GL User Manual

802.11g adsl vpn firewall router with 3des accelerator

Billion BIPAC-7500G / 7500GL 802.11g ADSL VPN Firewall Router with 3DES Accelerator

Configuration

When you click this item, you get following sub-items to configure the ADSL router.

LAN, WAN, System, Firewall, VPN, QoS, Virtual Server and Advanced

These functions are described below in the following sections.

There are four items within the LAN section: Ethernet, Wireless, Wireless Security, Port

Setting and DHCP Server.

The router supports two Ethernet IP addresses in the LAN, and two different LAN subnets

through which you can access the Internet at the same time. Users usually only have one

subnet in their LAN, so there is no need to configure a Secondary IP address. The default

IP address for the router is 192.168.1.254.

RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.

Chapter 4: Configuration

Table of Contents

Bipac-7500g