Clamp Rod Assembly - Gilson TS-1 Operating Manual

Parts
Because of model and component variations in Gilson
Testing Screens, always specify the unit serial number
when ordering parts�
NOTE: Parts sold individually unless included with an
assembly or kit�
TS-2 Clamp Rod Assembly
Description
— TS-2 Clamp Rod Assembly (Complete)
CLAMP ROD PARTS
Clamp Rod with
1
Upper Guide Bearing, Collar, and Pin
2
Upper Guide Bearing Screw, 3/8x1in
3 Upper Guide Bearing Assembly
4 Clamp Rod with Collar, and Pin
5 Collar and Pin Only
6
Pin Only
7
Hard Steel Wearing Plate
8 Lower Threaded Block
9 Lower Guide Bearing Lock Washer
10 Lower Threaded Block Screw, 3/8x5/8in
11
Lower Guide Bearing Screw, 3/8x1 1/4in
12 Lower Guide Bearing Assembly
13 Lower Guide Bearing Stop Nut, 3/8in
— Lower Guide Dust Guard, Std�
Clamp Rod Assembly (Complete) includes all clamp rod parts
1
(2 assemblies required per Testing Screen)
Part Number # Req.
RPTS-2CRA 2
1
RPTS-2CRA1 1
RPTS-2CRA5 2
RPTS-2CRA4
RPTS-2CRA2
RPTS-2CRA3
RPTS-2CRA3-1 1
RPTS-2CRA11
RPTS-2CRA6
RPTS-2CRA10
RPTS-2CRA7
2
RPTS-2CRA9
RPTS-2CRA8 1
RPTS-1KEY8-1 2
RPTS-2CRA12 1
20
2
1
7
8
9
10
11
13
3
4
5
12