Table of Contents
Advertisement
11. Alarms
The Radio has two individually adjustable alarm times.
11.1 Alarm settings
Alarm 1 and alarm 2 are configured identically. Select
Alarm 1 or 2 by repeatedly pressing [alarm] and pressing
[enter/navigate] to confirm, and then make the following
settings by means of [enter/navigate].
Alarm:
• Select On to configure the alarm settings. The alarm
automaticallly activates once configuration is complete.
• Select Off to deactivate the selected alarm and its
settings
On time:
First choose the hour, then the minute at which the alarm
is to activate.
Duration:
Choose a time interval (15/30/45/60/90 minutes). The
alarm remains active for the selected time interval.
Source:
Set whether you wish to be woken by an alarm tone
(Buzzer), by DAB or by FM.
Preset:
If you selected DAB/ FM, choose which station you wish
to be woken with. You can choose any of the 10 favourite
station slots or the Last listened.
Enable:
Choose when the alarm is to activate:
→ Daily – Once – Weekdays – Weekends
Date:
If you selected Once, enter the date for the one-off alarm.
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
• It is recommended to allow the radio to update the
[alarm]
11.2 Activating/ deactivating the alarm
• Select Alarm 1 or 2 by repeatedly pressing [alarm], and
the option Alarm On/ Alarm Off by pressing [enter/
navigate] to activate/ deactivate the selected alarm
(1/2).
• If an alarm is activated, the corresponding symbol
will be displayed.
11.3 Activate/ deactivate alarm in standby mode
• Press [alarm] in standby mode to display the current
alarm setting.
• Press [alarm] again or rotate [enter/navigate] to
activate/deactivate alarm 1 and/or alarm 2.
• Press [enter/navigate] to confirm your settings.
11.4 Stopping the alarm/ Snooze function
• When the alarm activates, press [volume /
the alarm.
• Repeatedly press [
• The alarm turns off for the selected time interval (5/10
minutes) before activating once again.
• If the alarm is not stopped, the radio automatically
switches to standby mode after the preset time interval
(duration).
13
Note
time automatically. This ensures that the time is
always correct even if there is a separation of power
supply – for example a power cut.
] to activate snooze mode.
/
1
2
] to stop
Advertisement
Table of Contents
