Reboot Phone - NEC DT700 User Manual

SIP Handset User Guide
Assigning Speed Dial Programmable Buttons
Speed dial functions can be used with
'Programmable' buttons 2-12 8 (see Figure
1) To program a button use a combination
of fixed button keys and dynamic screen
keys as outlined below:.
:
1. Press the 'Feature' button to access the
programming function for the programmable
buttons..
2. Press 'Program' dynamic button within 3
seconds of pressing the 'Feature' button or the
screen returns to normal (if this happens, just
press 'Feature' again).
3. Press the programmable button you require for
the Speed dial (see Figure 1. No.5, above for
location)
4. Using the alpha-numeric dialling buttons, enter
the details (name and number) you wish to save
as instructed on the screen. When finished select
'OK' to move to the next step.
5. Monitor preference - a lamp and/or audible
signal can be set to indicate if the extension
assigned to the button is in use or ringing (to
answer press the button).
6. Directory Entry - allows the assigned number to
be stored on the telephone's searchable

Reboot Phone

Rebooting a telephone will enable the latest configuration files to be loaded onto the device. If the DT800 appears
to be malfunctioning please select:
*If you forget or lose your passcode it can be reset to the default by an administrator, please email:
After rebooting please report any further problems to Telephone Services at telephones@essex.ac.uk
[Publish Date]
ISS (Telecoms)
(DT 700) features 20180316 4.docx
Menu > 5 > OK
C:\Users\dwjoll\AppData\Local\Microsoft\Windows\INetCache\Content.Outlook\76WE6Q4W\TELS 005 SIP phone 4
Figure 2.
Figure 3.
telephones@essex.ac.uk