Opening The Saddle - PIAGGIO Fly 125 ie Manual

Final step-brown key
After extracting the last blue key, insert the brown key again and turn it to «ON» (carry
out this operation within 10 seconds after extracting the previous key). Leave it in this
position for 1 to 3 seconds and return it to «OFF».
Proper programming check (01_13)
Disable the transponder from the brown key; in order to do this remove the Piaggio
clip-on badge and extract the transponder «C» from the handgrip «D». Insert the key
into the ignition switch and turn it to « ON». Perform the engine starter operation.
Ensure that the engine does not start. Insert the blue key and repeat the start-up
operation. Check that engine starts.
WARNING
IF THE ENGINE STARTS WITH THE BROWN KEY (AND WITH A DISABLED
TRANSPONDER) OR IF DURING THE PROGRAMMING A WRONG STEP HAS
01_13
BEEN CARRIED OUT, IT IS NECESSARY TO REPEAT THE PROCESS FROM THE
BEGINNING.

Opening the saddle (01_14)

Insert the key into the saddle lock «A», turn it anticlockwise and tip the saddle forward.
01_14
18