Important Warnings And Safety Instructions; Important Warnings; Important Safety Instructions - Pool Pro CPP Series Installation & Operating Instructions Manual

1. IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1.1 Important Warnin g s
A
This manual contains important information about the installation, operation and safe use of
this product. This information should be given to the owner and/or operator of this equipment.
When installing and using this electrical equipment, basic safety precautions should always be
followed. Failure to follow safety warnings and instructions in this manual can result in serious
injury and/or damage to your equipment. Read and follow all warning notices and instructions
which are included in this manual.
The Power Pack internally contains live components. There is a danger of electric shock if
opened. If the power cord is damaged then it should be replaced by the manufacturer, their
agent or similar qualified person, in order to avoid a hazard. The product shall be installed
according to AS/NZS 3000 wiring rules. It shall be installed outside the pool zone.

1.2 Important Safety Instructions

To reduce the risk of injury, do not permit young children to use this product unless they have
E
been trained by the person responsible for their safety and they acknowledge their ability to
use such equipment. To reduce the risk of accidents or incidents, service on the unit should
only be performed by your local Pool Pro Professional.
A
When mixing acid with water, ALWAYS ADD ACID TO WATER. NEVER ADD WATER TO ACID.
A
DO NOT PLUG UNIT IN IF CARTON HAS BEEN WET.
CHLORINE GAS BUILDUP CAN OCCUR WITH IMPROPER WIRING: To reduce the risk of personal
~
injury the Power Pack is designed so that the Electrolytic Cell will only receive power when the
pool pump is on. Otherwise, dangerous chlorine gas build-up can occur. If the pump is not
installed to the AC Socket (pump outlet) on the Power Pack then the installer must ensure that
the Electrolytic Cell is never energised when the pool pump is OFF or water is not flowing
through the unit.
Should you re q uire further Information visit
www.poolpro.com.au
•