Vacuum Maintenance And Care - Kenmore SSV Quick Clean 125.10440710 Use & Care Manual

To Remove and Re-assemble Brush Roll for
Manual Cleaning:
1. Ensure the vacuum is OFF.
2. Turn unit to the side to access the brush
roll. To unlock brush roll, grab metal
ring and rotate to the unlocked symbol
position. With nozzle facing down, pull
out the brush roll from the housing.
-A-
3. Clean off debris and anything wrapped
around the brush. Use a screwdriver
wrapped with a clean cloth to clean the
left and right surface of the inner air-
path.
4. Align the brush roll to the brush drive
and slide the brush roll into the housing.
You may need to rotate the roll slowly
to make sure the roll matches the drive
gear, then the roll can be completely
inserted. Rotate the brush to ensure it
turns easily before turning vacuum ON.
-A-
5. Lock the brush roll in place by rotating
the metal ring from the unlocked symbol
position to the locked position.
6. Place the metal ring in the slot.

VACUUM MAINTENANCE AND CARE

Brush Roll Reset
If the brush roll is blocked or overloaded,
the unit will automatically stop power.
Switch the unit to the OFF position and
remove the obstruction.
Nozzle Hose Blockage Removal
1. To clean out the hose, press the release
button on the wand, and pull the
motorized nozzle away from the wand.
Release Button
2. Carefully remove any debris or blockage
from inside of the hose. Reattach the nozzle
onto the wand.
3. Once the blockage is removed, start the
vacuum to ensure air flow through the
hose.
CAUTION!
sharp objects to remove a blockage from the
hose.
- 15 -
Do not use scissors or other