Assembly Instructions - Kenmore SSV Quick Clean 125.10440710 Use & Care Manual

Before assembling the vacuum cleaner, check the PACKING LIST (Page 2). Use this list
to verify that you have received all the components of your new Kenmore Elite SSV l
QuickClean Cyclonic Multi-Vac.
1. Insert the hand vacuum into the wand
until you hear a click.
2. Insert the wand into one of the motorized
nozzles until you hear a click.
Click
3. Slide the battery pack along the slots
under the hand vacuum handle into the
vacuum.
4. Insert the battery charger base into the
charging dock.
5. Use the 2 screws provided to mount the
charging dock on the wall, but not to
drywall only. Secure the screws to a stud.
Mount at a recommended height of 59"
and no less than 44" above the floor.
Ensure that no plumbing or electrical
cables, wires or ductwork are located
directly behind the mounting area.

ASSEMBLY INSTRUCTIONS

Click
Click
- 10 -
6. Charge the unit for 3.5 hours before
using the vacuum for the first time.