Operating Instructions - Kenmore SSV Quick Clean 125.10440710 Use & Care Manual

CAUTION
Moving parts! To reduce the risk of personal injury, DO NOT
touch the brush roll when vacuum is on. Contacting the brush
roll while it is rotating can cut, bruise or cause other injuries.
Always turn off before servicing. Use caution when operating
near children or pets.
The power slider button is located above
the handle of the hand vacuum. The SSV
has two-speed controls, low and high.
High Speed
Low Speed
OFF
CAUTION
Operate appliance at room temperature
39.2 - 104°F (4 - 40°C) in order to
ensure its safety and normal function.
Before cleaning, connect the bare floor
nozzle to the wand. Then connect the hand
vacuum to the wand.
Slide the power switch to the desired power
level (Low or High). Once turned on, the
battery level indicator will be lit.
To turn the vacuum off, slide the power
switch down to the bottom.

OPERATING INSTRUCTIONS

CONTROL BUTTONS
OFF
VACUUM OPERATION
Battery Power Level Indicators
25%
The Battery Power Level indicators light
up blue to give you an idea of how much
battery power remains at any given time.
To turn the vacuum off, slide the power
switch down to the bottom.
NOTE:
When battery power decreases
to about 10% remaining, the last bar of the
battery level indicator will start flashing. The
flashing will continue until the unit is placed
on the charging dock or is completely out
of battery power.
- 12 -
50% 75% 100%