About the Safety Trigger
When replacing the filter cover onto the air purifier, always make
sure the magnetic safety trigger is properly aligned with its
respective area. [Figure 2.1]
NOTE: If the trigger is not properly aligned, the air
purifier will not turn on.
O P E R AT I O N
General Operation
1.
Place the air purifier on a level surface. [Figure 3.1]
2. Plug the air purifier into a powered electrical outlet.
3. Tap
to turn on the air purifier. It will start operating at
medium speed.
4. (Optional) Tap
to adjust the fan speed of the air purifier.
There are 3 fan speeds to choose from (see Button Controls
& Functions, page 8).
5. Tap
to turn off the air purifier when you are finished
using it.
NOTE: Always allow at least 15 inches (38 cm) of clearance on all sides
of the air purifier. [Figure 3.2]
safety trigger makes
contact with the base
Figure 2.1
Figure 3.1
38 cm
Figure 3.2
7