Button Controls & Functions - Levoit LV-H133 Manual

Tower hepa air purifier
Hide thumbs Also See for LV-H133:
Table of Contents

Advertisement

Button Controls & Functions
Power Button
Turns the air purifier on or off.
Fan Speed Button
Tap
to cycle through the adjustable fan speeds
of the air purifier: low, medium, and high (see Chart
A below).
Fan Speed Indicator
NOTE:
• The fan speed cannot be adjusted while on Auto or Sleep Modes.
• To effectively clean the air, make sure to keep your windows closed
while the air purifier is operating.
• For best results, it is recommended to run the air purifier at maximum
speed for 15–20 minutes before using a lower speed setting or setting
the air purifier to Auto Mode.
Auto Mode Button
Tap
to activate the Auto (automatic) Mode on
the air purifier. This mode automatically adjusts the
fan speed of the air purifier according to the current
air quality. The air quality indicator around the LED
display will also illuminate a certain color based on
the air quality and fan speed (see Chart B below).
Indicator Color
Air Quality
Blue
Very Good
Green
Orange
Red
8
Chart A
Fan Speed
Low
Medium
High
Chart B
Fan Speed
Sleep Mode
Good
Low
Moderate
Medium
Bad
High
Sleep Mode Button
Tap
to activate Sleep Mode on the air purifier. This
function sets the air purifier to its lowest speed setting
to create a quiet environment while producing clean air.
Display Button
Turns the LED Display on or off while the air purifier is
operating.
NOTE: While the display is off, you can tap any button
(except for
) to turn on the display.
Timer Button
Allows you to program a timer for 1–12 hours.
1. Tap
repeatedly to choose a time.
2. Once you have reached the desired time, the
timer display will flash 5 times before setting.
3. The air purifier will automatically power off once
the timer has finished counting down.
4. To cancel the timer, tap
the timer display reads "- - - -". Wait until "- - - -"
flashes 5 times to exit out of the timer function.
NOTE:
• To quickly select a time, press and hold
seconds, or until the desired time appears on the
timer display.
• The timer function will remember your previously
programmed time when you press
• The timer function is available for all modes.
repeatedly until
for 2
.

Advertisement

Table of Contents
loading

Table of Contents