About The Filter - Levoit Core 300S User Manual

A B O U T T H E F I LT E R
The air purifier uses a 3-stage filtration
system to purify air.
A. Pre-Filter
• Captures large particles such as dust,
lint, fibers, hair, and pet fur.
• Maximizes the filter's life by
protecting it.
B. H13 True HEPA Filter
• Captures at least 99.97% of airborne
particles 0.3 microns ( m) in size.
• Traps small particles such as mold
spores, fine dust, smoke particles,
and allergens such as pollen, dust mites,
and pet dander.
C.
• Physically adsorbs smoke, odors, and
fumes.
• Filters compounds such as
formaldehyde, benzene, ammonia,
hydrogen sulfide, and volatile organic
compounds (VOCs).
12
Clean Air Delivery Rate
This air purifier has a Clean Air Delivery Rate of
240 m /h.
Clean Air Delivery Rate (CADR) measures the
volume of clean air that an air purifier produces
per minute. This is based on removal of dust,
pollen, and smoke, which are the 3 most
A
common indoor air pollutants. The higher the
CADR, the more particles the air purifier will
remove and the larger the area it can clean.
The rating is measured at the air purifier's
highest speed.
B
Air Change Per Hour
The air change rate is how many times
C
all of the air in a room can be purified (or
"changed") by the air purifier in 1 hour. Air
changes per hour (ACH) are calculated on the
recommended room size assuming
2.4 m / 8 ft ceilings. For smaller rooms, the air
change per hour will increase. This air purifier
has an air change per hour of 2, which means
it can change air 2 times per hour at the max
speed in a single, closed room up to 50 m .
air purification will take longer, with fewer air
changes per hour.
Note:
and doors closed while the air purifier is on.
Humidity
Moisture may damage the filter. This air
purifier should be used in an area with a
humidity level below 85% RH. If you use the
air purifier in excessively humid areas, the
surface of the filter may become moldy.
Note: Water or moisture will allow mold to
grow. To solve a mold problem, get rid of
the source of the moisture and clean up the
mold. Air purifiers cannot solve an existing
mold problem, and can only remove mold
spores and reduce odors.