Verification of Vehicle Repair
After a repair, it is essential to verify that the fault has been corrected.
1. Connect GDS and select "DTC" button.
2. Press "DTC Status" button and confirm that "DTC Readiness Flag" indicates "Completed". If not, drive the vehicle
within conditions noted in the freeze frame data or enable conditions.
3. Read "DTC Status" parameter.
4. Is parameter displayed "History(Not Present) fault"?
▶ System performing to specification at this time. Clear the DTC.
▶ Go to the applicable troubleshooting procedure.
Fuel System > Fuel Delivery System > Components and Components Location
Components Location
1. Fuel Tank
2. Fuel Pump
3. Sub Fuel Sender
9. Fuel Tank Pressure Sensor (FTPS)
10. Canister Close Valve (CCV)
11. Fuel Level Sensor (FLS)