the value specified by "Frame rate". It also depends on combination of image
size and frame rate. (V11R:58)
Before use, be sure to check whether an image is output at the specified frame
rate. If not, reconfigure the image size or frame rate to the other value.
It has been confirmed that this issue happens in the following combinations.
Confirmed firmware version is v3.0/2 in all cases.
IQeye752 (max. image size1600x1200):
(20fps) are being specified.
IQeye753 (max. image size 2048x1536):
(12fps) are being specified.
IQeye755(max. image size 2560x1920):
(10fps) are being specified.
3-18 Other
・ N/A
Output at 10 fps when the image size (800x600) and frame rate
Output at 6 fps when the image size (1024x768) and frame rate
Output at 5 fps when the image size (1280x960) and frame rate
- 18 -
NSR-1000 Series v1.1.1 Release Note