３ Notes; ３-１ Installation / System Configuration; ３-２ Download From The Nsr-1000 Series; ３-３ Analog Camera Registration - Sony NSR-1000 Series Release Notes

３
Notes
３-１ Installation / System Configuration
・ The NSR-1000 Series cannot connect with the client if the setting for 'Network
Interface for Remote Client' on the 'Server Configuration' is configured as
'Network3'. Please set 'Network1' or 'Network2'. (VT1:2036)
・ If user changes the time zone setting on the 'Setup Menu' in the middle of
operation such as schedule recording, scheduled recording setting or scheduled
action setting change. In case of changing the time zone setting after
configuring schedules, please make sure them and correct them if necessary.
(VT1:2026)
・ Only one USB mouse and/or one USB keyboard should be connected with the
NSR-1000 Series. It is not recommended to connect more than one USB mouse
and. or USB keyboard or use of KVM switch. (VT1:1868)
・ Patch files consists of the two files. One is for the NSR software and
the other
patch files for upgrading the NSR to V1.1.0 (or later).
Applying order can be arbitrarily determined. (V11N:314)
３-２ Download from the NSR-1000 Series
・ If user downloads software tools such as the RealShot Manager Advanced,
Media File Player, and User's Guide from the NSR-1000 Series, user may not
download with Internet Explorer as ftp client software. In this case, please
download with not Internet Explorer but Explorer or other ftp client software.
(VT1:2012)
３-３ Analog camera registration
・ Maximum frame rate which can be set in all combinations of analog cameras
using the NSBK-A16 has the following limitations. Please notice that the
NSR-1000 Series with NSBK-A16 doesn't allow to set over this limitation.
(VT1:1800)
is for the User's
- 8 -
NSR-1000 Series v1.1.1 Release Note
Guide. Be sure to apply these two