Au-272 Board (Other Than Hdw-2000, Dvw-2000/2000P, Msw-2000) - Sony DVW-M2000 Installation Manual

1-10. Switch Settings on Circuit Boards

1-10-2. AU-272 Board (Other than HDW-2000, DVW-2000/2000P, MSW-2000)

If necessary, perform the following audio-related settings using the switches on the
AU-272 board (Suffix -12 and higher).
. Analog audio (longitudinal audio) output gain
. Analog audio (AFM) output gain
n
The AU-272 board is not used in HDW-2000, DVW-2000/2000P nor MSW-2000.
A B C
1
S201
2
S700 S600
3
4
AU-272 Board (Suffix -12 and higher, Side A)
Analog Audio output gain settings (For Betacam/Betacam SP longitudinal audio)
Channel Ref. No.
CH1 S101
CH2 S201
(Factory setting)
Analog Audio output gain settings (For Betacam SP AFM)
Channel Ref. No.
CH3 S600
CH4 S700
(Factory setting)
n
The S600 and S700 are not used in HDW-S2000/S2000P.
1-18
D E
S101
Switches state (\ \ \ \ \ : Knob position)
0 dB +3 dB
(For increasing the gain of the longitudinal audio playback
level by +3 dB)
Switches state (\ \ \ \ \ : Knob position)
+3 dB
0 dB
(For increasing the gain of the AFM playback level by +3 dB)
< Top View >
HDW-2000/M2000/M2000P/S2000/S2000P/M2100/M2100P, DVW-2000/2000P/M2000/M2000P
MSW-2000/A2000/A2000P/M2000/M2000P/M2000E/M2000EP/M2100/M2100P/M2100E/M2100EP