Troubleshooting - Breville Tea Maker BTM800XL Instruction Book

TROUBLESHOOTING

TROUBLESHOOTING
PROBLEM EASy SOLUTION
Tea Maker will not • Check that the power plug is securely inserted into the outlet
switch 'ON'
• Insert the power plug into an independent outlet
• Insert the power plug into a different outlet
• Reset the circuit breaker if necessary
• For additional safety the Tea Maker is fitted with a thermal
cut out. In the event of severe overheating, the Tea Maker will
automatically shut down to prevent further damage. Should
this occur, call Breville Consumer Support.
The Tea Maker will • Check that the Glass Jug is securely positioned on the
Power Base.
not work
The LCd light has • The Tea Maker goes into standby mode if not used for
gone out 3 minutes. When in standby mode, the LCD screen will
cease to illuminate.
• To re-activate the Tea Maker out of standby mode:
− Remove then replace the Glass Jug from the Power Base.
− Press any button on the Power Base except the HOT
WATER|Cancel or TEA|Cancel buttons. The LCD screen
will re-illuminate.
I cannot select a • Certain features cannot be selected or changed during the
certain function heating or brewing cycle. The LCD screen may temporarily
change or a sound alert may be heard, but no changes to the
cycle will be made.
The LCd screen • The LCD screen will display a flashing 'RESET' when there is
a resettable electronic issue. Lift the Glass Jug off the Power
displays 'RESET'
Base then put it back on. Alternatively, remove the plug from
the wall outlet, wait 5 seconds, then plug back in.
• Call Breville Consumer Support if the 'RESET' message
continues.
The LCd screen • The LCD screen will display a flashing 'ERROR' when there is
a non-resettable issue with the appliance. Should this occur,
displays 'ERROR'
call Breville Consumer Support.
31