Table of Contents
Advertisement
If your kettle boils dry
If the kettle is operated with insufficient water a built in fail-safe
device will automatically switch off the kettle.
•
Unplug the kettle and allow it to cool. When the kettle has
cooled down sufficiently the device will reset itself.
•
Once the device has reset, refill the kettle with cold water
and use it as normal.
Energy saving hints and tips
Your kettle, if used correctly, is a very energy efficient device.
Why not try some of these energy saving tips:
•
Only boil the water you need. Overfilling your kettle by one
cup is the equivalent to using an energy saving light bulb
for one hour!
•
It is not always necessary to re-boil your kettle. For
example, one litre of water will still be at 90°C after five
minutes - the perfect temperature for a cup of coffee.
Care and cleaning
Always unplug the kettle from the mains supply socket and allow it
to completely cool down before cleaning or descaling it. Do not immerse
the kettle, power base or power cord and plug in water or any other
liquid.
1. Clean the exterior surface of the kettle with a damp cloth
and then polish with a soft dry cloth. Do not use steel wool
pads or harsh/abrasive cleaners.
2. Descale your kettle regularly to keep it working efficiently.
Use a proprietary descaling product following the
manufacturer's instructions carefully.
Cleaning the filter
•
Open the lid and remove the filter from behind the spout.
•
Rinse the filter under a tap whilst brushing it with a soft
brush. In hard water areas it may be necessary to descale
the filter using a descaling agent.
•
Use a proprietary descaling product following the
manufacturer's instructions carefully. The filter may be
washed safely in the cutlery rack of a dishwasher.
•
Refit the filter back into the kettle.
Replacement parts
For additional or replacement parts, please visit www.breville.
co.uk or call us on 0161 621 6900.
Troubleshooting
For troubleshooting and FAQs visit www.breville.co.uk/faqs
5
Advertisement
Table of Contents
