Auto Start Feature; A Note On Standby Mode; Moving The Tea Basket After The Brewing Cycle - Breville Tea Maker BTM800XL Instruction Book

AUTO START
NOTE
Once a customized time has been
selected and one tea making or water
heating cycle has been activated,
the customized time will remain in
the memory of the Tea Maker until
you change it. To return to default
settings, see Page 32.

AUTO START fEATURE

This feature allows you to program the
specific time when the Tea Maker will
automatically turn on and start either a tea
brewing cycle or water heating cycle.
Setting the 'Auto Start' feature
1. Select the desired tea type and
tea strength.
2. Press and hold the AUTO START
button until the LCD screen displays
the AUTO START clock symbol
and a blinking CURRENT TIME and
START TIME. The button surround will
illuminate and the tea alert will sound.
3. To set the CURRENT TIME, press the
left ARROW UP button to increase
the time, or the left ARROW DOWN
button to decrease the time in 1 minute
increments. Ensure the correct 'AM' or
'PM' is displayed.
NOTE
Pressing and holding the ARROW
UP button or ARROW DOWN button
will increase the scrolling speed.
22
4. To set the START TIME, press the right
ARROW UP button to increase the
time, or the right ARROW DOWN
button to decrease the time in 1 minute
increments. Ensure the correct 'AM' or
'PM' is displayed.
5. Once current time and start time are
programmed, press either the flashing
HOT WATER|Cancel or TEA|Cancel
button to select which feature you would
like to start at the programmed time.
6. The LCD screen will display the current
time and start time, in addition to the
AUTO START symbol. The AUTO
START button surround will illuminate
and remain illuminated until the START
TIME is reached, indicating that the
'Auto Start' feature has been activated.
7. Ensure that the Tea Maker is
prepared with:
a) Sufficient water in the Glass Jug and tea
leaves in the Basket for the tea brewing
cycle or,
b) Sufficient water in the Glass Jug for the
water heating cycle.
8. Once the selected START TIME
is reached, the Tea Maker will
automatically commence the tea
brewing or water heating cycle. During
this time, the AUTO START button
surround will no longer illuminate until
the cycle is complete.
AUTO START
Re-selecting the 'Auto Start' feature using
previous START TIME
1. Press the AUTO START button
once. The HOT WATER|Cancel and
TEA|Cancel buttons will flash.
2. Press either the HOT WATER|Cancel or
TEA|Cancel button to re-select the the
desired function. The 'Auto Start' feature
has now been re-set.
NOTE
The 'Auto Start' feature can be canceled
anytime by pressing the AUTO START
button. The LCD screen will no longer
display the AUTO START symbol and
the AUTO START button surround will
cease to illuminate.

A NOTE ON STANdBy MOdE

When the Tea Maker is plugged into a wall
outlet, the LCD screen will illuminate for
3 minutes before entering standby mode.
When in standby mode, the LCD screen will
cease to illuminate.
To re-activate the Tea Maker out of standby
mode, press any button, except the HOT
WATER|Cancel or TEA|Cancel button
on the Power Base. The LCD screen will
re-illuminate. Pressing either the HOT
WATER|Cancel or TEA|Cancel button will
start the respective operation immediately.
MOvING THE TEA BASKET AfTER
THE BREWING CyCLE
After the brewing cycle is complete, you
may wish to lower the Tea Basket again
for extra infusion to produce a stronger
tasting tea. To do this, press and hold the
BASKET button for 2 seconds. The button
surround will flash and the Tea Basket will
automatically lower to the bottom of the
Glass Jug.
Once the desired strength has been reached,
press and hold the BASKET button for
2 seconds. The button surround will flash
and the Tea Basket will automatically rise to
the top of the Glass Jug.
NOTE
If the Glass Jug is removed from the
Power Base and the Tea Basket is in the
lowered position, it will automatically
return to the top upon return of the
Glass Jug to the Power Base.
23