Table of Contents
Advertisement
All manuals and user guides at all-guides.com
6.1
Introduction
The print server is available for TCP/IP printing by Unix lpd (Line Printer
Daemon) protocol. The lpd protoc ol originated with Unix release is based on
the BSD version of Unix and supported under most versions of Unix.
This chapter explains how to configure the print server for TCP/IP operation,
and how to modify configuration files on your Unix system to allow printing to
the print server. The configuration examples in this manual follow the syntax
for
BSD
based
Unix
systems.
Please
refer
to
the
related
system
documentation for the correc t syntax of your systems.
To configure the print server for lpd printing, perform the procedures below:
1. Enable Print Server's TCP/IP Support.
2. Set up Print Server's IP address .
3. Verify Print Server's IP Address .
4. Configure remote lpd printing on the host.
5. Print a test page.
In the next sec tions , we will describe thes e five procedures s tep by s tep.
50
Advertisement
Table of Contents
