Table of Contents
Advertisement
Available languages
Available languages
RESIDUAL HEAT INDICATOR
WARNING!
burns from residual heat.
DAILY USE
WARNING! Refer to Safety chapters.
ACTIVATING AND DEACTIVATING
Touch
for 1 second to activate or deactivate the
hob.
AUTOMATIC SWITCH OFF
The function deactivates the hob
automatically if:
•
all cooking zones are deactivated,
•
you do not set the heat setting after you activate
the hob,
•
you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean the
control panel.
•
the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
•
you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
•
you do not deactivate a cooking zone or change
the heat setting. After some time
and the hob deactivates.
The relation between the heat setting and the
time after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
There is a risk of
comes on
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
The induction cooking zones make the heat
necessary for cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
THE HEAT SETTING
Touch
to increase the heat setting. Touch
decrease the heat setting. Touch
same time to deactivate the cooking zone.
AUTOMATIC HEAT UP
If you activate this function you can get a necessary
heat setting in a shorter time. The function sets the
highest heat setting for some time and then
decreases to the correct heat setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking zone:
touch
(
comes on). Immediately touch
(
comes on). Immediately touch
correct heat setting comes on. After 3 seconds
comes on.
To deactivate the function: touch
To activate the function for a cooking zone if
there is no
on the display: touch
chose the highest heat setting 9 and touch
again. Immediately touch
setting.
To deactivate the function: change the heat
setting.
POWER FUNCTION
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
Refer to "Technical information"
chapter.
To activate the function for a cooking zone:
touch
.
comes on.
To deactivate the function: touch
to
and
at the
until the
.
then
to set a desired heat
or
.
7
Advertisement
Table of Contents
