Eclipse AVN726EE Quick Start Manual page 8

Screen Operations after Turning
Power ON
When the engine is turned ON, the DVD/audio
power will automatically turn ON and the
Caution screen will appear. After the selection
of the language, touch [I Agree] to switch to the
Navigation screen. The power will turn OFF
when turning off the engine.
ATTENTION
● Press [NAVI] if the navigation screen does not
appear.
● Press [MENU] and then touch [AUDIO OFF] if the
audio or DVD does not turn ON.
Setting the Navigation Operation
Mode
The main unit provides a choice of operation
modes ("Simple mode" and "Advanced mode"),
each providing different menus and settings.
The navigation operations and map-screen
layout are the same in each mode. This
document describes the basic navigation
operations available from "Simple mode." See
the ECLIPSE web manual for advanced
navigation operations ("Advanced mode").
When the power of the main unit is turned on for
the first time, the screen switches in the order
shown below.
a
b
c
● "Simple mode" or "Advanced mode" can be
switched later.
● The features and settings available in each
mode are as follows:
a Available in Simple mode
b Available in Advanced mode
Type of action
Navigating to a selected map point
Navigating to a street address
Navigating to
address
Navigating to an intersection
Navigating to recent destinations
(History)
Navigating to Favorites
Navigating to a POI
Navigating to coordinates
Creating a multi-point route
Saving a map point as a Favorite
destination
Saving a map point as a POI
Saving a map point as a location of
a Road Safety Camera
Mark a map point with a Pin
Saving the active route
Saving Track Logs
Map Screen settings
Menu settings
Sound settings
Route Planning options
Regional settings
Warnings
*1: Only background picture
*2: Only Master volume
*3: Only language selection
34
a
Yes
Yes
an incomplete
Yes
Yes
Yes
Yes
Yes
No
No
Yes
No
No
No
No
No
No
*1
Yes
*2
Yes
Yes
*3
Yes
No
b
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes