Service Menu Overview - SystemAir SAVE VTR 300/B Installation And Service

8.5 Service menu overview

Enter the service menu by selecting the service symbol in the display.
Menu Level 1 Menu Level 2
Service Password
Password Password XXXX
Locked YES/NO
Service Change
Change password
Password Actual
New
Confirm XXXX
Service Filter period
Filter
period Time to
replace:
12month
Reset NO/YES
Service
Time/Date
Time/Date
YY/MM/DD
Date:
12/09/12
Time:
Weekday:
Service
Ext/Force Run
Ext/Force
Run
Minutes:
Fan speed:
Nominal
SAVE VTR 300/B
208348
Menu Level 3
XXXX
XXXX
10:00
Sat
0
26
Explanation
Enter the service level
by typing 1111. Use the
SELECTION knob for each
digit and confirm with the
CONFIRM button after each
set digit. NO will unlock the
system and allow parameter
changes.
Set new password if
necessary.
In case the new password
would be forgotten or
misplaced it's still possible
to enter the service level by
writing 8642. This overrides
the earlier set password.
Shows selected time interval
between filter change.
Set Reset of the filter period
to YES after completed filter
change.
Set time between filter
changes.
Shows current set date and
time.
Set Correct date and time.
Use this dialogue frame to
program extended time you
want the unit to work under
operation conditions other
than determined by the week
schedule.
Shows set time for
extended/forced running.
Shows Set fan speed.
Set the time that the unit is to
run in extended/forced mode.
Value range: 0–240 minutes.
Set the fan speed for this
mode. Choose between Low,
Nom or High.
Default value: Nom.
Installation and Service
Systemair AB