Labeling A Cd; Disc Memo; Custom File Function); Locating A Disc By Name - Sony XR-C6090 Operating Instructions Manual

Fm/am cassette car stereo
Hide thumbs Also See for XR-C6090:
Table of Contents

Advertisement

Available languages

Available languages

Labeling a CD

— Disc Memo

(CD unit with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name and select the specific tracks for
playback.
1
Play the CD and press (LIST) for two
seconds.
CD
2
Enter the characters.
1 Press (+) to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
CD
If you press (–), the characters appear
in the reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (SEL) after locating the desired
character.
The flashing cursor moves to the next
space.
CD
If you press (SEL) when the eighth
character (farthest right character) is
flashing, the flashing part goes back to
the first character (farthest left
character).
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to the normal CD playback
mode, press (LIST) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
Note
If you try to label an MD and you have not connected a
CD changer with the custom file function "*FULL*" then
"--------" appear in the display, but you cannot input
characters. In this case, press (LIST) for two seconds.
Displaying the disc memo
Press (DSPL) during CD playback.
CD
Each time you press (DSPL) during CD
playback, the item changes as follows:
z Elapsed playback time
Clock Z
Erasing the disc memo
1
Press (SOURCE) to select the CD unit.
2
Play the CD and press (LIST) for two
seconds.
3
Press (5) while pressing (SEL).
4
Press (+) or (–) to select the name that
you want to erase.
5
Press (SEL) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.

Locating a disc by name

— List-up (CD unit with custom file function)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to "Labeling
a CD".
continue to next page n
z Disc name
EN
13

Advertisement

Chapters

Table of Contents
loading

Table of Contents